Connecting Hdmi/Dvi To A Tv - Samsung DVD-HR757 Instruction Manual

Connecting HDMI/DVI to a TV

If your TV has a HDMI/DVI input, connect HDMI/DVI
Adapter cable to a TV. You will enjoy the best
quality images and sounds.
• Case 1 : Connecting to a TV with HDMI Jack
• Case 2 : Connecting to a TV with DVI Jack
Case 1 : Connecting to a TV with HDMI
Jack
• Using the HDMI cable (not supplied) connect the
HDMI OUT jack on the rear of the HDD & DVD
RECORDER to the HDMI IN jack of your TV.
• Press the input selector on your TV remote control
until the HDMI signal from the HDD & DVD
RECORDER appears on your TV screen.
Case 2 : Connecting to a TV with DVI
Jack
• Using the DVI Adapter cable (not supplied), connect
the HDMI OUT jack on the rear of the HDD & DVD
RECORDER to the DVI IN jack of your TV.
• Using the audio cables, connect the AUDIO (red and
white) OUT jacks on the rear of the HDD & DVD
RECORDER to the AUDIO (red and white) IN jacks
of your TV. Turn on the HDD & DVD RECORDER
and TV.
• Press the input selector on your TV remote control
until the DVI signal from the HDD & DVD
RECORDER appears on your TV screen.
J

To use HDMI cable (not supplied), make the
Audio/Video connection before plugging in the
power cord or after fi nishing the "Plug & Auto
Setup." Do not connect the HDMI cable while
the "Plug & Auto Setup" is progressing.

Progressive scan automatically activates when
HDMI is connected.

If your TV does not have Bitstream decoder,
you must set the digital audio output to PCM in
order to watch through the HDMI output.
(See pages 33~34)

Depending on the HDMI device (TV/HDMI
Receiver) you use, audio may not be
supported. If TV/HDMI Receiver does not
support Dolby digital, Audio output is not
available when you set Digital output as
'Bitstream' in Audio setup menu. In this case,
set the digital audio output to PCM. If TV/HDMI
Receiver does not support DTS, Audio output
is not available when you play disc in DTS
format.

You can switch from the HDMI output to other
output only in stop mode.

If you use an HDMI cable to connect a
Samsung TV to the HDD & DVD RECORDER,
you can operate the recorder using the TV
remote control.
(This is only available with SAMSUNG TVs
that support Anynet+(HDMI-CEC).)
(See page 31)

Please check the n logo (If your TV has
an n logo, then it supports Anynet+
function.)
English - 23
White
Red