Connecting Hdmi/Dvi To A Tv (Dvd-Sr275M Only); Case1 : Connecting To A Tv With Hdmi Jack; Case 2 : Connecting To A Tv With Dvi Jack - Samsung DVD-SR270M User Manual

• Take care to respect the colour coding of the up and
down channels.
• Press the input selector on your TV remote control until
the Component signal from the DVD Recorder appears
on your TV screen.
white
red
COMPONENT INPUT
white
red
▌ Progressive Scan
Your TV must support progressive scan input to allow to
watch progressive scan component video out.
(See page 35)
• Make sure that the colour coded connections match. That is,
the Y, P and P component output jacks of your DVD
B R
Recorder should be connected to the exact corresponding
component input jacks on your TV.
Otherwise, red or blue images will be displayed on the TV
screen.
• Consumers should note that not all high defi nition television
sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of progressive
scan picture problems, it is recommended that you switch the
connection to the standard defi nition output.
If there are questions regarding your Samsung TV set's
compatibility with this DVD Recorder, please contact our
customer service centre.
M

See your TV User's Manual to fi nd out if your TV
supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's
instructions regarding Progressive Scan settings in the
TV's menu system.

Depending on your TV, the method of connection
may diff er from the illustration above.
green
If your TV has an HDMI/DVI input, connect HDMI/DVI
blue
cable to a TV. You will enjoy the best quality images and
red
sounds.
Component
cable
(not supplied)
1.
red
2.
blue
green
3.
1.
2.
3.
English - 20

What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as
the interlace output method has.
Progressive scanning method can provide better and
clearer picture quality.

You must connect the DVD Recorder to the
component(s) before using the Progressive Scan
feature.
Connecting HDMI/DVI to a TV
(DVD-SR275M only)
Case 1 : Connecting to a TV with HDMI
Jack
Connect one end of the HDMI-HDMI cable into the
HDMI OUT jack on the rear of the DVD Recorder.
Plug the other end of the HDMI-HDMI cable into the
appropriate input connector on the television.
Press the input selector on your TV remote control
until the HDMI signal from the DVD Recorder appears
on your TV screen.
HDMI-HDMI Cable
(not supplied)
Case 2 : Connecting to a TV with DVI
Jack
Connect one end of the HDMI-DVI cable into the
HDMI OUT jack on the rear of the DVD Recorder.
Plug the other end of the HDMI-DVI cable into the
DVI IN jack on the television.
Using the audio cables, connect the AUDIO (red and
white) OUT jacks on the rear of the DVD Recorder to
the AUDIO (red and white) IN jacks of your TV. Turn on
the DVD Recorder and TV.