Step 2 : Connecting Hdmi/Dvi To A Tv; Connecting To A Tv With Hdmi Jack - Samsung DVD-R157 Instruction Manual

Step 2 : Connecting HDMI/DVI to a TV

If your TV has a HDMI/DVI input, connect the HDMI/DVI cable to the TV. You will enjoy the best quality image and
sound.
▌

Connecting to a TV with HDMI Jack

Using the HDMI- HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack
of your TV. Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder
appears on your TV screen.
■ To watch through the HDMI output, set the digital
audio output to PCM.(See page 32)
■ Depending on the HDMI device(TV/HDMI
Receiver) you use, audio may not be supported.
If your TV does not support Dolby digital/DTS,
Audio output is not available when you set the
Digital output to Bitstream or select DTS On in
the Audio setup menu. In this case, set the digital
audio ouput to PCM or DTS Off.
■ If you use an HDMI cable to connect a Samsung
TV to the DVD recorder, you can operate the
recorder using the TV remote control. (This is
only available with SAMSUNG TVs that support
Anynet+(HDMI-CEC).) (See pages 30~31)
Downloaded From Disc-Player.com Samsung Manuals
■ Please check the
logo, then it supports Anynet+ function.)
English - 16
logo (If your TV has an