Samsung DVD-HR757 Instruction Manual page 38

Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No].
Yes No
M

When the HDMI cable (not supplied) is connected, this screen
is not displayed.

If the P.SCAN button on the HDD & DVD RECORDER's front
panel is pressed during playback, the message "This function
is possible only on stop mode" appears on the screen.

Progressive setting is only available when the HDD & DVD
RECORDER is in stop mode.
◆
Canceling the Progressive scan
1. With the unit in Stop mode, press the P.SCAN button on the front of
the HDD & DVD RECORDER.
The message "Press [Yes] to confi rm Interlace scan mode.
Otherwise, press [No]." will appear.
Press the ◄► buttons to select Yes, and then press the OK button.
2.
3. Set your TV to Interlace input (using the TV remote control.)
M

Do not press the P.SCAN button if you are using a TV that
does not support Progressive mode as nothing will be
displayed on the screen.

If you press the P.SCAN button by mistake when your TV does
not support Progressive mode, the mode will then need to be
released. To release the Progressive mode, press the P.SCAN
button on the front panel 3 times. The screen will recover after
the PS indicator on the front panel display turns off.
English - 38