Installing Static Addressing - Avaya 9601 Installing And Maintaining

Installing static addressing

The usual way to assign IP Addresses to 9601, 9608, 9608G, 9611G, 9621G, or 9641G IP
deskphones is the automatic method described in
Addressing Process)
IP Addresses is desired.
!
CAUTION:
Static addressing is necessary when a DHCP server is unavailable.
CAUTION:
Because of the increased opportunities for text entry errors associated with static
addressing, Avaya strongly recommends that a DHCP server be installed and
static addressing avoided.
Use the following procedure to invoke manual address information programming.
1. Use the Craft password to gain access to the Admin Procedures screen. The default
password is 27238.
2. When you select ADDR from the Admin Procedures screen, the deskphone displays the
Static Addressing Local Procedure screen.The following table lists the fields that you can
use to enter the required information.
Static Addressing screen
Use DHCP
Phone
Router
Mask
HTTPS File Server
HTTP File Server
DNS Server
802.1Q
VLAN ID
VLANTEST
Host to ping
where:
nnn.nnn.nnn.nnn is the current IP Address associated with the specific address
●
information to its left, which could be either a value previously set by a technician, or the
original IP Address value if no previous change was made,
on page 32. There might be times, however, when manual assignment of
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
0=auto, 1=on, 2=off
nnn.nnn.nnn.nnn or
AVohhhhhh
Installing static addressing
Power-Up and Reset Operation (Dynamic
Line Description and
(Configuration Parameter Value)
Yes Yes or No (USE_DHCP)
Deskphone IP Address (IPADD)
Router in use; gateway/router IP
Address(es) (ROUTER)
IP network mask (NETMASK)
IP Address of HTTPS File Server
(TLSSRVR)
IP Address of the HTTP File Server
(HTTPSSRVR)
DNS server IP Address(es)
(DNSSRVR)
(L2Q)
(L2QVLAN)
dddd
Number of seconds to wait for a
ddd
DHCP offer (VLANTEST)
IP Address or DNS Name
Issue 5 August 2014 47