Chapter 3: Local Administrative Options; Introduction - Avaya 9601 Installing And Maintaining

Chapter 3: Local administrative options

Introduction

During installation or after you have successfully installed a 9601, 9608, 9608G, 9611G, 9621G,
or 9641G IP Deskphone, you might be instructed to administer one of the manual procedures
described in this chapter. These local administrative procedures are also referred to as Craft
Procedures.
Note:
You can modify the settings file to set parameters for deskphones that download
Note:
their upgrade script and application files from the same HTTP server. See
Chapter 4: Maintaining the 9601, 9608, 9608G, 9611G, 9621G, and 9641G IP
deskphones. Only trained installers or technicians must perform local (craft)
procedures. Perform these procedures only if instructed to do so by the system or
LAN administrator.
Static administration of these options causes upgrades to work differently than if
they are administered dynamically. Values assigned to options in static
administration are not changed by upgrade scripts. These values remain stored
in the deskphone until you use the local administrative procedures CLEAR or
RESET.
Use these option-setting procedures only with static addressing and, as always, only if
instructed by the system or LAN administrator. Do not use these option-setting
procedures if you are using DHCP. DHCP is the Dynamic Addressing Process, as
indicated in
page 32.
Power-Up and Reset Operation (Dynamic Addressing Process) on
Issue 5 August 2014 41