Logging out
Use the following procedure to log off a deskphone.
!
CAUTION:
Once a deskphone is logged off, you might need a password and extension to log
CAUTION:
back on.
1. Use the Craft password to gain access to the Admin Procedures screen. The default
password is 27238.
2. When you select LOGOUT from the Admin Procedures screen, the deskphone displays a
confirmation screen asking if you are sure you want to log out.
3. Press No to return to the Admin Procedures screen without logging off the deskphone.
Press Yes to unregister the deskphone from the call server.
Resetting system values
Use the following procedure to reset all system initialization values to the application software
default values.
!
CAUTION:
This procedure erases all static information, without any possibility of recovering
CAUTION:
the data.
1. Use the Craft password to gain access to the Admin Procedures screen. The default
password is 27238.
2. When you select RESET VALUES from the Admin Procedures screen, the deskphone
displays a confirmation screen asking if you are sure you want to reset the deskphone.
3. Press No to return to the Admin Procedures screen without resetting the deskphone. Press
Yes to start the deskphone reset. A reset:
Resets all system values and system initialization values except AUTH and AUTH_ONLY
●
to default values.
Resets call server values to their defaults.
●
Resets the 802.1X identity and password to their default values.
●
Deletes any entries in the Redial buffer.
●
Does not affect user-specified data and settings like Contacts data or the deskphone
●
login and password. To remove this type of data, see the
page 50.
Logging out
Using the Clear procedure
Issue 5 August 2014
on
57