Entering Data For Administrative Options - Avaya 9601 Installing And Maintaining

Entering data for administrative options

This section applies to all 9601, 9608, 9608G, 9611G, 9621G, or 9641G IP deskphones and
describes how to enter data for administrative options.
1. With the exception of a touchscreen deskphone, the first application line on any screen is
automatically highlighted (selected) when the deskphone displays the screen. To select the
item on that line, press the appropriate softkey at the bottom of the screen, for example,
Change, Save, or OK. To select a different line, use the down or up navigation arrows to
change the line focus. When the desired line is highlighted, then press a softkey or OK to
select that line. For a touchscreen deskphone, touching the desired line produces the same
result.
2. Attempts to enter invalid data are rejected and the deskphone emits an error beep.
3. If you enter a numeric digit that causes the IP Address or subnet mask value to exceed 255,
or any value to exceed its maximum field value, the deskphone plays an error beep tone.
The deskphone ignores the digit entered when the error tone was played, and the cursor
does not move forward.
4. If you enter a numeric digit for a value or for an IP Address or subnet mask field after
entering only a zero, the new digit replaces the zero.
5. To move the cursor backwards to remove a character, press the Bksp softkey. When you
press the backspace key, the most recently entered digit or period is erased from the
display. The cursor remains in the erased character's former position.
6. The More softkey provides data entry options like symbols, all capital letters for text,
numerals, etc.
7. Pressing Back or Exit (or touching that softkey for a touchscreen deskphone) exits the local
procedures. Any changes require a deskphone restart. Otherwise, the deskphone
re-displays whatever had been displayed when the Craft Local Procedures were invoked. If
no ADDR changes were made or if the local procedures were invoked post-startup, the
deskphone redisplays the screen (or other display) that was effective when the craft option
was invoked.
Note:
If PROCSTAT has been administered to 1, you will not be able to invoke any
Note:
administrative options other than V I E W.
The touchscreen deskphones present an onscreen keyboard that allows you to
"type" the data you want to enter on the deskphone. See the applicable user
guide for information about using the onscreen keyboard.
Entering data for administrative options
Issue 5 August 2014 43