Pre-Installation Checklist For Static Addressing; Static Addressing Installation - Avaya one-X 9600 Series Installation And Maintenance Manual

Local Administrative Options

Pre-Installation Checklist for Static Addressing

Before performing static programming of address information, verify that all the requirements
listed in the Verify These Network Requirements
met. You do not have to consider item
addition, you must have the values for the following parameters. Failure to do so can cause data
entry errors that prevent the telephone from working. Such errors can also have a negative
impact on your network. Print copies of this checklist for each subnet.
1. The IP Address of the media server.
2. The IP Address of the gateway/router.
3. The IP netmask.
4. The IP Address of the HTTP server.

Static Addressing Installation

The usual way to assign IP Addresses to IP telephones is the automatic method described in
Dynamic Addressing Process
assignment of IP Addresses is desired.
!
CAUTION:
Static addressing is necessary when a DHCP server is unavailable.
CAUTION:
Because of the increased opportunities for text entry errors associated with static
addressing, Avaya strongly recommends that a DHCP server be installed and
static addressing avoided.
Use the following procedure to invoke manual address information programming.
1. When you select ADDR from the Craft Local Procedure Screen, the Static Addressing Local
Procedure screen displays as follows with the prompt "Select address to change.":
Static Addressing screen
Phone
Call Server
Router
Mask
File Server
802.1Q
VLAN ID
VLAN Test
where:
38 9600 Series IP Telephones Release 3.0 Installation and Maintenance Guide
4. on page 15, as it refers to the DHCP server. In
on page 24. There might be times, however, when manual
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
NVL2Q text string
dddd
ddd
section of the Pre-Installation Checklist
Line Description and (System Value)
Telephone IP Address (IPADD)
Call Server in use; media server IP Address
router in use; gateway/router IP Address
IP network mask (NETMASK)
IP Address of HTTP/S File Server in use
NVL2Q setting text description
NVL2QVLAN
NVVLANTEST
are