Starter Rope Guide Bushing - Stihl MS 341 Shop Manual

: Carefully press home the fixing
pins (arrows).
Reassemble all other parts in the
reverse sequence.
MS 341, MS 361, MS 361 C
8.8 Starter Rope Guide
Bushing
Wear on the guide bushing is
accelerated by the starter rope
being pulled sideways. The wall of
the bushing eventually wears
through and the bushing becomes
loose.
– Remove the fan housing with
rewind starter – b 8.2
– Remove the rope rotor – b 8.4
– Use a suitable tool to pry the
damaged bushing out of the fan
housing.
– Place the new bushing in the fan
housing.
1
: Insert the screw spindle (1) of the
installing tool 0000 890 2201
through the bushing from inside
the fan housing.
– Fit the thrust sleeve (1), tapered
end first, and the hex nut.
: Tighten down the hex nut until the
bushing is firmly seated.
The installing tool flares the lower
end of the rope bushing.
– Remove the installing tool.
Reassemble all other parts in the
reverse sequence.
1
63