Stihl MS 341 Shop Manual page 21

– Clean all parts – b 16.
– Replace any damaged parts.
Assembling the clutch
: Slip the retainers onto the clutch
shoes.
2 1
: Fit the clutch shoes over the
arms (1) of the clutch carrier so
that the series number (2) is on
the same side as the longer
hexagon (3).
20
: Clamp the clutch in a vise.
2
1
: Attach one end of each spring (1)
to the clutch shoes.
: Use the hook (2) 5910 890 2800
to attach other end of the spring
and press it firmly into the clutch
shoe.
3
1
: Fit the cover washer (1) on the
crankshaft so that "TOP" faces
outward.
1
: Screw home the clutch (1),
hexagon (arrow) facing outward,
and tighten it down firmly – b 3.5
– Remove locking strip from the
cylinder.
Reassemble all other parts in the
reverse sequence.
MS 341, MS 361, MS 361 C