Stihl MS 341 Shop Manual page 105

Removing screw
No. Part Name
33 Torque wrench
34 Torque wrench
35 Crimping tool
36 Socket, 13 mm, DIN 3124
37 Socket, DIN 3124-S19x12.5L
38 Screwdriver bit T 27 x 125
39 T-handle screwdriver, T 27 x 150 5910 890 2400
40 Press arbor
41 Press arbor
42 Pliers, DIN 5254-A 19
43 Assembly drift
44 Press sleeve
45 Press sleeve
Remarks:
1) Use only for releasing P screws.
104
Part No. Application
5910 890 0301 0.5 to 18 Nm
Alternative: Torque wrench
5910 890 0302 with optical/acoustic
signal
5910 890 0311 6 to 80 Nm
Alternative: Torque wrench
5910 890 0312 with optical/acoustic
signal
5910 890 8210 Attaching connectors to electrical wires
5910 893 5608 Flywheel nut
5910 893 5613 Clutch
0812 542 2104 Removing and installing spline socket
head screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench
IS-P screws (4 mm)
1118 893 7200 Removing and installing ball bearing
(clutch side)
1122 893 7200 Removing and installing ball bearing
(flywheel side)
0811 611 8380 Removing and installing external
retaining rings
0000 893 4700 Removing and installing the piston pin
1118 893 2400 Installing oil seal(s)
1124 893 2400 Pulling crankcase halves together
Rem.
1)
MS 341, MS 361, MS 361 C