9.
AV System
9.1
Repair
The crankcase and tank housing
are connected by vibration damping
rubber buffers and springs.
Damaged rubber buffers (annular
buffers) and springs must always be
replaced in sets.
MS 341, MS 361, MS 361 C
9.1.1
Spring between Front
Handle and Cylinder
– Remove the shroud – b 6.2
: Take out the screws (arrows).
1
2
: Squeeze retaining lugs (1 + 2)
carefully together and pull the
spring out of the front handle.
The spring itself, with its integral
retainer and mounts, cannot be
disassembled.
Reassemble in the reverse
sequence.
9.1.2
Annular Buffer between
Tank Housing and
Crankcase
2
1
– Remove the air filter – b 12.1
: Remove the collar screw (1).
: Take out the screws (2).
: Remove the annular buffer (3).
Reassemble in the reverse
sequence.
3
65