Error/Warning Codes; Outline; List Of Error And Warning Codes - Canon BJ-W3000 Service Manual

CHAPTER 5. TROUBLESHOOTING
III. ERROR/WARNING
CODES
A. Outline
This machine has a self-diagnostic
function by means of the engine controller
and image controller. Diagnosis is carried
out as required.
If a problem is detected, a code or symbol
and a message indicating the type of problem
are indicated on the message display of the
operation panel.
Problems with the printer are classified
into errors and warnings as shown below.
Error:
A state in which the printer stops
operating and cannot return to normal
operation until the cause of the trouble
is removed.
Warning:
A state in which the machine does not
stop operating, and can continue without
removing the cause of the problem.
However, the printed image may be
influenced.
5–18
B. List of Error and Warning
Codes
• Error/warning code configuration
Alphabetic
th th
th
6 digit digit 4 digit 3
5
W:Warning Origin
E :Error 001~099
Figure 5-301
CAUTION
• For the code descriptions, since the
codes enclosed with ( ) are displayed
as messages, the codes themselves are
not displayed. However, in the
"WARNING" and "ERROR" areas in
the service mode, the last 20 codes,
including the codes enclosed with ( ),
are displayed.
Numeric
nd
rd st
digit 2 digit 1
digit
Details
00~99