Gl Command System); Gl2 Command System); Rtl Command System); Esc Command System) - Canon BJ-W3000 Service Manual

15. 061xx (GL command system)
16. 062xx (GL2 command system)
17. 063xx (RTL command system)
18. 064xx (ESC command system)
19. 065xx (PJL command system)
20. 067xx (TIFF command system)
Problem/Unit
Data transmission
problem
Improper printer-
computer communi-
cation setting
Image controller
21. 097xx (Direct error code from the image controller)
Problem/Unit
Malfunction
Image controller
22. 098xx (Direct error code from the engine controller)
Problem/Unit
Malfunction
Engine controller
23. 099xx (Others)
Problem/Unit
Defective firmware
Step Check item
1 Does the same phenomenon occur
with other data transfers?
2 Is the printer-computer communi-
cation setting proper?
Step Check item
1 Is the error corrected by turning the
power switch OFF and ON?
Step Check item
1 Is the error corrected by turning the
power switch OFF and ON?
Step Check item
1 —
CHAPTER 5. TROUBLESHOOTING
Result Remedy
NO Explain to the user that the trouble
is in the data transfer.
NO Set the communication mode
properly.
YES Replace the image controller.
Result Remedy
YES Completed.
NO Replace the image controller.
Result Remedy
YES Completed.
NO Replace the engine controller.
Remedy
Turn the power swith OFF and ON.
5–39