Removing The Power Switch; Removing The Dc Power Supply - Canon BJ-W3000 Service Manual

4. Removing the power switch

1) Remove the PCB box
2) Remove the screw with a crown washer
[1] and the 2 screws [2].
3) Disconnect connector [3] and remove the
power switch [4].
[2]
[1]
Figure 3-608
(See page 3-34).
[4 ]
[3]
CHAPTER 3. MECHANICAL SYSTEM

5. Removing the DC power supply

1) Remove the power switch.
2) Disconnect the connector and the DC
power supply [3] after removing 4 screws
[2].
[2]
Figure 3-609
[3] [1] [2]
3–35