Lines (Carriage Direction) - Canon BJ-W3000 Service Manual

7. Lines (Carriage direction)

Normal
Normal
Problem/Unit
Main menu settings
Clogged nozzles
Foreign substance stuck
to the head
Improper paper feed rate
adjustment
Defective head
Step
Check item
1
Is the "Band Joint" selected in "Feed
Priority" in the [System Setup] menu?
2 Carry out the [Head Cleaning] for the
applicable color.
Is the nozzle check pattern of that color
normal when printing using the "Nozzle
Check" in the [Internal Print] menu?
Load the recommended type of media
3
larger than A3 (plain paper or coated
paper) and execute the "Auto Band-Adj"
in the [Adjustment] menu.
4 Is the problem remedied by replacing the
BJ print head of that color and executing
the following?
• Load the recommended type of media
larger than A3 (plain paper or coated
paper) and execute the "Auto Band-
Adj" in the [Adjustment] menu.
CHAPTER 5. TROUBLESHOOTING
Abnormal
Abnormal
Result
If the problem persists after setting
NO
"Band Joint", check the following.
NO If the problem persists after
this step has been attempted 3
times, check the following.
Completed.
YES
Completed.
YES
Remedy
5–49