Control Panel Power Switch; Shutting Down The Machine - Canon imagePRESS C7000VP Reference Manual

Control Panel Power Switch

Press the control panel power switch to cancel the Sleep mode and
resume normal machine operations.
NOTE
• The machine can receive and print documents from a personal computer
when it is in the Sleep mode. I-fax documents can also be received while
the machine is in the Sleep mode.
• It takes approximately 7 minutes (C7000VP/C6000VP), or 11 minutes
(C6000) for the machine to recover after the Sleep mode is deactivated.
• If Energy Consumption in Sleep Mode is set to 'Low', it may take more than
10 seconds for the touch panel display to be displayed after pressing the

control panel power switch.

Shutting Down the Machine

If there are any jobs currently being processed, or a MEAP application
is running when the Shutdown mode is activated, the machine asks
you to confirm and cancel any existing jobs, and then access to the
hard disk is restricted. This procedure protects the hard disk from
access errors the next time the machine is turned ON. When the
machine shuts down, it also performs an internal cooling down
process, which enables the machine to be shut down safely. Follow
the instructions below to safely shutdown the machine.
CAUTION
If you turn the main power of the machine OFF without following the
procedure below, copies output the next time the machine is turned
ON may not be printed correctly. In this case, printing will return to
normal after a certain number of copies are output.
IMPORTANT
Do not initiate the Shutdown mode during fonts are being downloaded.
1
Press and hold the control panel power switch for more
than three seconds.
If the machine is in the Sleep mode, press the control panel power
switch one time to cancel the Sleep mode, and then press and hold
the control panel power switch again for more than three seconds.
The job confirmation screen is displayed.
Main Power and Control Panel Power A1-12