Operations Flow - Panasonic WJ-NV200K Installation Manual

Operations flow

Obtain the license (Registration Key)
z
x
Turn on the recorder
c
Register the license (Registration Key)
v
b
n
22
☞ Activation Key Card
Connection
☞ Page 23
☞ Page 31
☞ Page 33
Quick setup
☞ Page 38
Basic setup and
Advanced setup
☞ Pages 41-76
Start operations
z Obtain the "Registration Key" of the recorder by follow-
ing the instructions on the provided Activation Key Card.
x Install hard disk drives in the recorder (☞ page 29) and
connect the recorder to each device.
c Turn on the power of the recorder.
v Register the "Registration Key" for the recorder.
Important:
• Be sure to register the "Registration Key" of the recorder.
b Register the date & time and cameras on "Easy Start".
When it is not necessary to change other default set-
tings, it is possible to start operations. After cameras are
added or replaced, register the cameras on "Easy Start".
n If necessary, perform the detailed settings for each func-
tion.
Note:
• Some functions are not supported depending on the
models of the connected cameras. For further informa-
tion about detailed specifications, refer to the operating
instructions of the cameras in use.