Camera Selection - Panasonic WJ-NV200K Installation Manual

Set up date & time display [Date & time display]
Select the date & time display position for each camera and transmit it to the cameras to change the camera settings.
Clicking the [Setup >] button for "Date & time display" on the [Camera setup] tab will display the following items.
■ Setting items
[Display]
Choose whether or not to display the date & time. If date &
time display is activated, date & time will be displayed on
camera images and will also be recorded with the recorded
images.
To transmit the settings to the camera, mark this item, and
select either of the following.
On: Date & time displayed
Off: Date & time not displayed
Default: On
Note:
• The display format corresponds to the settings on the
[Date & time settings] tab (☞page 42).
Set up OSD [Display title]
Select the title to display and the display position for each camera; the settings will be changed after the settings have been
transmitted to the camera.
Clicking the [Edit >] button for "Display Title" on the [Camera setup] tab will display the following items:
[Position]
Select the position to display the date & time on the images.
If the setting is to be transmitted to the camera, mark this
item to select the display position.
L-Upper/ L-Lower/ R-Upper/ R-Lower
Default: L-Upper
Note:
• The position to display the title edited on "Display title"
(☞ page 48) is the same as the "Position" selected here
to display the date & time edited on "Date & time dis-
play".

■ Camera selection

Select the camera to which the date & time display setting is
to be sent. Mark the checkbox of the camera to which the
setup information is to be transmitted.
[Transmission] button
Transmit the date & time setting to the camera.
Once transmission is completed and the setting has been
applied to the camera, "OK" will be displayed in the
"Results" field. If the display reads "Authentication error",
etc., the camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings. The screen
returns to the [Camera setup] tab.
■ Setting items
[Display]
Select whether or not to display the title on camera images.
If title display is activated, the title will be displayed on cam-
era images and will also be recorded with the recorded
images.
If the setting is to be transmitted to the camera, mark this
item to select it.
On: Title displayed
Off: Title not displayed
Default: On
47