Panasonic WJ-NV200K Installation Manual page 67

Restrictable operations
It is possible to allow or restrict the following operations for each user.
Operation
Camera operation
Camera control
Search and playback
Copy
Alarm reset
Error reset
Setup
Camera image display
* It is recommended to restrict "Setup" to the administrator.
Set up the user level for individual cameras
Select the cameras allowed for operation by each user level (operator/viewer/logged out) by marking the respective checkboxes.
Remove the check mark from any cameras not to be displayed. The setting for the administrator/manager cannot be changed.
[Back] button
Click the button after completing the settings. The screen
returns to the [Basic] tab.
Description
Camera images displayed on the main monitor can be changed.
Camera control such as panning and tilting can be performed.
Recorded images can be played back and searched by VMD search.
Recorded images can be copied to storage media such as an SD memory card.
An alarm action can be canceled.
An error action can be canceled.
Setup menus can be displayed and the settings can be configured.
The image and audio data of all cameras can be displayed/output. To set up the display of
camera images, click the [Setup] button. (☞ Set up the user level for individual cameras)
67