Panasonic WJ-NV200K Installation Manual page 48

[Display Title]
To transmit the settings to the camera, mark this item, and
edit the title displayed on the image. Clicking the [Edit >] but-
ton will display the following title editing window:
• [Display Title]
Enter a character string to be displayed on the image
using the on-screen keyboard. (☞ Page 36) (Up to 16
alphanumeric characters)
Available characters: 0-9, A-Z and the following marks.
! # $ % ( )* + , - . / : ; = ? (space)
• [Camera title]
Display the camera title registered on the [Main monitor]
tab of the monitor page (☞ page 59).
Set up the refresh interval [Refresh interval]
Select the image refresh interval for each camera and transmit it to the cameras to change the camera settings.
Clicking the [Setup] button for "Refresh interval" on the [Camera setup] tab will display the following items.
[Refresh interval]
Select an interval to update the image display. If used in a
network environment where frequent errors occur, shorten
the refresh interval to reduce image distortions. However, the
refresh interval may be longer than the set value.
0.2 s/ 0.5 s/ 1 s/ 2 s/ 3 s
Default: 1 s
48
• [Copy] button
The camera title registered on the [Main monitor] tab of
the monitor page can be used as display title. Clicking
this button will copy the camera title to the "Display Title"
field.
• [Back] button
Click the button after completing the settings. This will
close the window.
■ Camera selection
Select the camera to which the set display title is to be sent.
Mark the checkbox of the camera to which the setup infor-
mation is to be transmitted.
[Transmission] button
Transmit the set display title to the camera.
Once transmission is completed and the setting has been
applied to the camera, "OK" will be displayed in the
"Results" field. If the display reads "Authentication error",
etc., the camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings. The screen
returns to the [Camera setup] tab.
■ Camera selection
Select the camera to which the refresh interval setting is to
be transmitted. Mark the checkbox of the camera to transmit
to.
[Transmission] button
Transmit the refresh interval setting to the camera.
Once transmission is completed and the setting has been
applied to the camera, "OK" will be displayed in the
"Results" field. If the display reads "Authentication error",
etc., the camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings. The screen
returns to the [Camera setup] tab.