Change Pin Code; Factory Reset - Teac HD-B820 Owner's Manual

Menu Operation

Change PIN Code

• The system will ask you to enter it again to confirm.
• If you forgot the PIN code, press SUB-T(Red), I(Green), Audio(Orange), Pre-channel(Blue)
& MENU in sequence.

Factory Reset

HD-B820
Use the MENU button to stop Channel Search.
When the Channel Search is completed, press
OK button to save the result.
Press the MENU button to return to the
previous menu.
Note : The Manual Channel Search may
take a few minutes, depending upon
how many CH(Networks) were
ticked(tag),before press GREEN key.
Note : The pin number is required to access
the installation/Channel search.
You can change your PIN(Personal
Identification Number) Code from factory
default value "0000" as follows:
• Select Change PIN Code in the Installation
Menu.
• Then you will be asked for a New PIN Code.
Enter the new PIN Code.
• All data you are using will be deleted and the
default data will be loaded.
• If you select "OK", it asks your confirmation.
• If you don't want to reset, press MENU
button or EXIT button to exit this menu.
- 29 -
High Definition Digital Terrestrial Receiver