Table of Contents
Advertisement
Connecting Your Equipment
Rear Panel
1 2
5
3 4
1
ANT IN
To connect the antenna here.
2
LOOP THROUGH
Used to connect a RF signal from the STB to either the RF input
jack (antenna) on your VCR or to the antenna input of your TV.
3
S-VHS
To connect to S-VHS (S-Video) input of the display device. Note
that no on screen display may be available on this output when
either 576p or 720p is selected.
4
YPbPr
The 3 coloured RCA (Cinch) connectors are only for Component
mode. Press the OUTPUT key on the remote controller. The
letters 'ypb' will momentarily appear on the front display when
component video mode is selected.
5
VIDEO & AUDIO L/R
To connect Video(CVBS) & Audio L/R to a TV, Audio Amp or
Hi-Fi system.
6
DVI
To connect to the digital video input on your High Definition
Device (Plasma, LCD or computer monitor display). Press the
OUTPUT key to select dRGB(DVI) or RGB(Analog RGB) mode
for this feature.
USB
To upgrade a new software and to enjoy "Extras" services(Picture
7
Viewer, Music Player) using USB memory.
8
OPTICAL
To connect S/PDIF cable for digital audio(Dolby Digital streaming
out).
HD-B820
6
7
8
- 11 -
High Definition Digital Terrestrial Receiver
Advertisement
Table of Contents
