Change Pin Code; Parental Lock; Receiver Lock; Factory Reset - Teac DV-B800 Owner's Manual

Menu Operation

Change PIN Code

You can change your PIN(Personal Identification Number) Code from factory
default value "0000" as follows:
Select Change PIN Code in the Installation Menu.
Then you will be asked for a New PIN Code. Enter the new PIN Code.
The system will ask you to enter it again to confirm.
If you forgot the PIN code, press SUB-T(Red), I(Green), Audio(Orange),
Pre-channel(Blue) & MENU in sequence.

Parental Lock

You can prevent children or unauthorized people from watching programs.
Use the LEFT/RIGHT buttons to move to the Parental Lock position.
Select Parental rating values you want using CH+/CH- buttons.
And then press the OK button.
Once the Parental is locked, whenever you watch the locked channel, you should
enter the PIN code.
Note : The parental rating values used in Australia refer to a set of Australian
Classification codes, which may be different to those used in other parts of
the world.
DV-B800
Note : The pin number is required to access
the installation/Channel search and Parental
control menus.
Parental Rating Values
No Block : Not Classified
Block All : Lock all channels
Block G and above : General
Block PG and above : Parental Guidance
Block M and above : Mature Audience (15+)
Block MA and above : Mature Audience (15+)
Block AV and above : Adult, Strong Violence (15+)
Block R and above : Restricted 18+
- 30 -
High Definition Digital Terrestrial Receiver
Menu Operation

Receiver Lock

To lock the receiver, select Receiver Lock in the installation menu and select "ON" by
using the CH+/CH- and OK buttons.
Now the receiver is locked. Whenever you try to start STB, a window appears which
asks you to enter your PIN Code before picture appears on the screen.

Factory Reset

All data you are using will be deleted and the default data will be loaded.
If you select "OK", it asks your confirmation.
If you don't want to reset, press MENU button or EXIT button to exit this menu.
DV-B800
- 31 -
High Definition Digital Terrestrial Receiver