Table of Contents
Advertisement
Setting up Your System
VIDEO FORMAT
You can select Video Format by pressing the "FORMAT" button.
When you press the button, Video Format will change by the turn 1080i
576i
AUTO
Component : 1080i
VIDEO OUTPUT(See table on page 39)
You may select one of the various Video Outputs by pressing the button "OUTPUT".
Video Outs will change by the turn Component
S-VHS, CVBS(Composite Video) will be availale with all modes.
RGB : 1080i
HD-B820
Note : 1. S-VHS & CVBS(Video) output
format will not change regardless of
the selection.
2. OSD in 720p, 576p formats will not
be displayed through S-VHS &
CVBS outs.(OSD displayed only in
576i, 1080i formats)
3. When you select 576i, dRGB(DVI) &
RGB mode are not supported.
dRGB(DVI)
RGB(Analog RGB) .
If You select,
Component(It is default setting):
YPbPr
YPbPr
D-SUB
No out
DVI-I
No out
dRGB (digital RGB, DVI):
YPbPr
No output
DVI-I(ANALOG)
activated
DVI-I(DIGITAL)
DVI(Best picture)
RGB (analog RGB):
YPbPr
No output
DVI-I(ANALOG)
activated(Best picture)
DVI-I(DIGITAL)
DVI activated
- 17 -
High Definition Digital Terrestrial Receiver
720p
576p
Advertisement
Table of Contents
