Change Pin Code; Receiver Lock - Teac SDB420 Owner's Manual

Menu Operation

Change PIN Code

You can change your PIN(Personal Identification Number) Code from factory default value
"0000" as follows:
• Select Change PIN Code in the Installation Menu.
• Then you will be asked for a New PIN Code. Enter the new PIN Code.
• The system will ask you to enter it again to confirm.
• If you forgot the PIN code, press SUB-T(Red), I(Green), Audio(Orange), Pre-channel(Blue)
& MENU in sequence.

Receiver Lock

• To lock the receiver, select Receiver Lock in the installation menu and select "ON" by
using the CH+/CH- and OK buttons.
• Now the receiver is locked. Whenever you try to start STB, a window appears which asks
you to enter your PIN Code before picture appears on the screen.
SDB420
Note : The pin number is required to access
the installation/Channel search
- 31 -
Digital Terrestrial Receiver