Frequently Asked Questions - Teac HD-B820 Owner's Manual

Frequently Asked Questions

Q. I cannot get teletext to function?
A. The AUSTEXT Service is available on the Seven Network.
Q. Closed Captions don't always appear! Why?
A. Not all programs are captioned. News programs should always have captions available.
Q. Can I record Closed Captions on my VCR?
A. Yes, you may. You will need to connect the 3RCA cable(as supplied) to the Video & Audio
input on the VCR. Using the VCR remote, select 'AV', 'EXT' on 'Line In' selection. Set the
TV to the video channel. The set top box picture will appear. Now it may be recorded.
Q. Can I record the improved picture on my VCR?
A. Refer to the above answer.
Q. I cannot get the YPbPr connection to work properly. The colours seem wrong.
What can I do?
A. Check to make sure the coloured leads are connected correctly. Secondly, press the
OUTPUT key on the remote to select component mode. The front display will
momentarily display 'ypb'.
Q. I cannot get the DVI connection to operate. What can I do?
A. Using DVI can be tricky business. Make sure the RGB mode is selected (press OUTPUT
key on remote). Secondly, make sure that your cable is correct type called DVI-D and
that your display device can accept it. Some displays also require a signal with HDCP.
This type of display may be incompatible with this receiver
Q. My teletext is only displaying for 30 seconds and then disappears. Why?
A. Change the Screen Saver Time to 'Disable' if you require longer.
Q. I cannot get any on-screen graphics to display when using S-Video or Composite
Video. Why?
A. You must press the FORMAT key until 1080 or PAL is shown on the front display
momentarily.
Q. When using DVI, I cannot select PAL (576i) mode. Why?
A. This is normal. This mode does not exist.
HD-B820
- 38 -
High Definition Digital Terrestrial Receiver