Change Pin Code; Parental Lock - Teac DVB400 Owner's Manual

Menu Operation

Change PIN Code

You can change your PIN(Personal Identification Number) Code from factory
default value "0000" as follows:
Select Change PIN Code in the Installation Menu.
Then you will be asked for a New PIN Code. Enter the new PIN Code.
The system will ask you to enter it again to confirm.
If you forgot the PIN code, press SUB-T(Red), I(Green), Audio(Orange),
Pre-channel(Blue) & MENU in sequence.

Parental Lock

You can prevent children or unauthorized people from watching programs.
Use the LEFT/RIGHT buttons to move to the Parental Lock position.
Select Parental rating values you want using CH+/CH- buttons.
And then press the OK button.
Once the Parental is locked, whenever you watch the locked channel, you should
enter the PIN code.
Note : The parental rating values used in Australia refer to a set of Australian
Classification codes, which may be different to those used in other parts of
the world.
DV-B400
Note : The pin number is required to access
the installation/Channel search and Parental
control menus.
Parental Rating Values
No Block
Block All
Block G and above
Block PG and above : Parental Guidance
Block M and above
Block MA and above : Mature Audience (15+)
Block AV and above : Adult, Strong Violence (15+)
Block R and above
- 31 -
: Not Classified
: Lock all channels
: General
: Mature Audience (15+)
: Restricted 18+
Digital Terrestrial Receiver