Automatic Channel Search For Television Services; Manual Channel Search - Teac HD-B820 Owner's Manual

Setting up Your System
Automatic Channel Search for Television Services(1st Step)
You can automatically detect and save all channels as follows:
System Connection
Power On

Manual Channel Search

You can automatically search and save all channels as follows :
Main Menu/Installation
Channel Search / Manual
HD-B820
• Connect STB as per pages 12 to 13 (as applicable).
• Turn on the power of STB and other devices
connected to the STB.
• Select Channel Search in the Installation Menu.
• Enter the PIN Code. (Factory PIN Code is '0000')
• Press RED (SUB.T) button and the STB will
automatically search all channels and save them
into the channel list. Once finished, your box is
ready to be used.
• Select Channel Search in the Installation Menu.
• Enter the PIN Code. (Factory PIN code is '0000')
• Select the television service you want to search by
pressing the UP/DOWN buttons and the OK
button. A tick will be shown beside your selection.
You may select more than one television service to
manual tune.
• Press GREEN (Manual) button and the STB will
begin to search all channels you have chosen and
save them into the channel list.
- 15 -
High Definition Digital Terrestrial Receiver