Tv Display; Osd Language; Screen Saver; Divx Code - Teac DR-H300DAB Owner's Manual

Hide thumbs Also See for DR-H300DAB:
Table of Contents

Advertisement

TV Display

Because the shape of the television or monitor may
not match the shape of the movie frame, you may
need to change the way in which the image is
displayed to avoid distortion on older televisions,
which use a 4:3 aspect ratio; high-definition
televisions use 16:9 (as do movies).
Note that you may need to read your television's
manual in conjunction with this section in order to
achieve the best results. Some discs do not allow
the aspect ratio to be changed and you will
therefore have to change the aspect ratio on the
TV.
Make this setting while playback is stopped; you
cannot do this while playing back a disc.
4:3 PAN SCAN
This mode is used with 4:3 televisions. 4:3 images
are displayed normally. When showing 16:9
programs, the full height of the screen is used, but
the left and right part of the image are cut off.
4:3 picture
4:3 LETTERBOX
This mode is used with 4:3 televisions. 4:3 images
are displayed normally. 16:9 images are visible at
their full width, but a blank area is left at the top
and bottom of the screen.
4:3 picture
16:9
Use with a 16:9 wide television.
4:3 picture
Settings (General Setup Page)
16:9 picture
16:9 picture
16:9 picture
< Some wide-screen discs that do not permit Pan &
Scan mode playback are automatically played in
Letterbox mode.
< Depending on the DVD, Letterbox may be selected
automatically instead of Pan & Scan and vice versa.
< If WIDE is selected and a normal TV is connected,
16:9 content will appear distorted during playback
(objects look thin).

OSD Language

Select the desired language for onscreen menus
from the following:
English (default), French, German,
Italian, Spanish, Dutch
NOTE: If the unit is set to a foreign language and
you find it impossible to read the menu settings,
you can restore all the factory default settings, and
the menus will appear in English again (all other
settings will be wiped out).

Screen Saver

ON (Default):
The screen saver starts up if nothing is played back
and no operations are performed for 3 minutes.
OFF:
The screen saver does not start up.

DivX Code

In case you need the registration code to play DivX
files, select this.
The registration code of the player will be
displayed.
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R-h300Dr-h300ab

Table of Contents