Safety Instructions - Teac HD-B820 Owner's Manual

Safety Instructions

This STB has been manufactured to meet Australian safety standards.
Please read the following safety instructions carefully before you handle the STB.
DEFINITION Throughout the manual, you will find the letters STB.
This stands for Set-Top Box.
MAIN SUPPLY AC 100 ~ 230V ~ 50/60Hz 30W max.
CABLE Use standard certified cables to prevent any malfunction of the
STB.
LOCATION Keep the STB indoors and away from potential hazards, such as
houseplants, rain and direct sunlight.
CLEANING 1. Always disconnect the STB power cord from the wall socket
before cleaning it.
2. Use a light damp cloth(no solvents)to clean the case.
OVERLOADING Do not overload wall outlets, extension cords or adapters.
These can cause fire or electrical shock.
VENTILATION 1. Do not block ventilation slots of STB.
2. Do not place the STB on soft furnishings or carpets.
3. Ensure that a free airflow is maintained around the STB.
4. Do not allow the STB to be exposed to direct sunlight or a heater.
5. Do not stack other electronic equipment on top of the STB.
6. Do not place newspapers, tablecloth, or curtain(drapes) on top of
the STB as these may block the vent slots and cause hazard or
serious damage to the STB.
Do not put lit candles or any heated object on the STB.
LIQUIDS Keep liquids away from the STB.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
LIGHTNING 1. The Manufacture's instructions for safe guarding other equipment
connect to the STB, such as a television set, must be followed
during lightning conditions.
2. Ensure lightning protection devices for the terrestrial antenna,
and mains are installed.