Selecting Reignition Frequency - Biasi RinNOVA 24S User Manual And Installation Instructions

Figure 5.39
• Press buttons
"PM11" program that enables pump post-
circulation (Figure 5.40).
Figure 5.40
• To modify the programmed SET, press
or and wait for the programmed num-
ber to start to flash (Figure 5.41). Each step in-
crease or decreased corresponds to 1 second.
Figure 5.41
• Press to exit programming.
- 48 -
INSTALLATION
or to display the

5.16 Selecting reignition frequency

When the boiler functions in normal on/off
heating mode, the minimum time between
two ignitions is set to three minutes (re-igni-
tion frequency)..
This time can be changed from a minimum of
zero to a maximum of eight and a half minutes
by programming it either from the control pan-
el or remotely.
• Enter "programming mode" by pressing keys
12-13-14 together for 10 seconds (Figure
5.42) until the LCD display indicates the let-
ters P01, alternating with the value of the
parameter, indicating entry in "parameter 01"
(Figure 5.43).
10
11
Figure 5.42
Figure 5.43
15
14
13
12