Maintenance; Warnings; Removing The Body Panels - Biasi RinNOVA 24S User Manual And Installation Instructions

9

MAINTENANcE

9.1 Warnings

The operations described in this
chapter must only be performed
by professionally qualified per-
sonnel, therefore you are advised
to contact an Authorised Service
centre.
For efficient and continuous operation, the
user must have maintenance and cleaning car-
ried out once a year by an Authorised Service
Centre technician. If these operations are not
carried out, damage to components and boiler
operation problems will not be covered by the
conventional warranty.
Before performing any cleaning or mainte-
nance operation or before opening or remov-
ing the boiler panels, isolate the unit from
the electric power supply using the bipolar
switch installed on the plant and close the gas
cock.

9.2 Removing the body panels

Front panel
• Remove the screws A. Remove the front
panel by moving it upward to free it from the
lower hooks in Figure 9.1.
MAINTENANCE
Figure 9.1
Side panels
• Loosen screw B in Figure 9.2 and remove the
side panels, pushing them upward to free
them from the upper supports.
Figure 9.2
control panel
Turn the control panel C, as shown in figure
Figure 9.3, to access the components inside
A
A
B
A
A
B
- 59 -