Table of Contents
Advertisement
0
21
3
1
8
6
1 5
9
1
2
Fig. 7.27
and
•
Press buttons
time to enter transparent programming
( Fig. 7.28 ).
Fig. 7.28
•
Press buttons
the "PM11" program of the pump post-
circulation ( Fig. 7.29 ).
Fig. 7.29
•
To modify the programmed SET, act on
buttons
or
programmed number to fl ash ( Fig. 7.30 ).
Each step increased or decreased corre-
- 60 -
COMMISSIONING
at the same
or
to display
and wait for the
sponds to 1 second.
Fig. 7.30
•
To exit programming, press button
7.12
Selecting the reignition fre-
quency
When the boiler functions in normal on/off
heating mode, the minimum time between
two ignitions is set at three minutes (re-igni-
tion frequency).
This time can be changed by a minimum of
zero to a maximum of eight and a half min-
utes by acting on programming both from
the panel controls and the remote control.
•
Enter the "programming mode" by press-
ing keys 11 - 12 - 13 ( Fig. 7.31 ) for 10 sec-
onds at the same time until the letters Pr
that alternate with code 01 are displayed
on the LCD display, indicating that "param-
eter 01"( Fig. 7.32 ) has been activated.
Fig. 7.31
.
13
12
11
Advertisement
Table of Contents
