Installing The Boiler Support - Biasi RinNOVA 24S User Manual And Installation Instructions

250
25
200
All measurements are expressed in mm
Figure 5.1
• Leave 6 cm of free space in front of the boil-
er if it is inserted in a cabinet, protection or
niche.
• In the case of an old heating system, before
installing the boiler, carefully clean it in or-
der to remove any sludgy deposits that have
formed over time.
• It is recommended to install a purification
filter in the system or use a product that con-
ditions the circulating water. This latter solu-
tion, in particular, not only cleans the system
but also provides anticorrosion protection by
forming a protective film on the metal sur-
faces and neutralising the gases in the water.
Filling the heating system:
• If the boiler is installed in rooms where the
ambient temperature could go below 0°C, it
is recommended to take the proper precau-
tions in order to prevent damaging the boiler.
INSTALLATION
• Do not add antifreeze or anticorrosion prod-
ucts to the heating water in the wrong con-
centrations or with chemical/physical char-
acteristics that are incompatible with the
hydraulic boiler components.
25
The manufacturer does not assume any liability
for this type of damage.
Inform the user about the antifreeze func-
tion of the boiler and any chemical products
added to the heating system.

5.3 Installing the boiler support

The boiler is provided with a support for as-
sembly.
A paper template (provided) is available that
contains all the measures and information for
correctly installing the support.
- 33 -