Wipers - Lexus rx350 2016 Owner's Manual

266
4-5. Using the driving support systems
WARNING
To avoid malfunction of the camera sensor
■
Observe the following precautions.
Otherwise, the camera sensor may not operate properly, possibly leading to an acci-
dent resulting in death or serious injury.
Keep the windshield clean at all times.
●
• If the windshield is dirty or covered with an oily film, water droplets, snow, etc.,
clear the windshield.
• If a glass coating agent is applied to the windshield, it will still be necessary to use
the windshield wipers to remove water droplets from the area of the windshield in
front of the camera sensor.
• If the inner side of the windshield where the camera sensor is installed is dirty, con-
tact your Lexus dealer.
Do not install an antenna or attach stickers
●
(including transparent stickers) or other items
to the area of the windshield in front of the
camera sensor (shaded area in the illustra-
tion).
If the part of the windshield in front of the camera sensor is fogged up or covered with
●
condensation or ice, use the windshield defogger to remove the fog, condensation or
ice. (P. 500)
If water droplets cannot be properly removed from the area of the windshield in front
●
of the camera sensor by the windshield wipers, replace the wiper insert or wiper
blade.
• To replace the wiper insert: P. 601
• If the wiper blades need to be replaced, contact your Lexus dealer.
Do not attach window tinting to the windshield.
●
Replace the windshield if it is damaged or cracked.
●
If the windshield needs to be replaced, contact your Lexus dealer.
Do not get the camera sensor wet.
●
Do not allow bright lights to shine into the camera sensor.
●
Do not dirty or damage the camera sensor.
●
When cleaning the inside of the windshield, do not allow glass cleaner to contact the
lens. Also, do not touch the lens.
If the lens is dirty or damaged, contact your Lexus dealer.
RX350_U_OM48E90U