Lexus rx350 2016 Owner's Manual page 539

Enabling 2-way communication with a garage door (only available for com-
■
patible devices)
When enabled, 2-way communication allows you to check the status of the
opening and closing of a garage door through indicators in your vehicle.
2-way communication is only available if the garage door opener motor used
is a compatible device. (To check device compatibility, refer to
www.HomeLink.com.)
Within 5 seconds after programming the garage door opener has been
1
completed, if the garage door opener motor is trained to HomeLink
both garage door operation indicators will flash rapidly (green) and the
light on the garage door opener motor will blink twice, indicating that
2-way communication is enabled.
If the indicators do not flash, perform
the HomeLink
Press a programmed HomeLink
2
Within 1 minute of pressing the HomeLink
3
operation has stopped, press the "Learn" or "Smart" button on the garage
door opener motor. Within 5 seconds of the establishment of 2-way com-
munication with the garage door opener, both garage door operation indi-
cators in the vehicle will flash rapidly (green) and the light on the garage
door opener motor will blink twice, indicating that 2-way communication is
enabled.
Reprogramming a single HomeLink
■
When the following procedure is performed, buttons which already have
devices registered to them can be overwritten:
With one hand, press and hold the desired HomeLink
1
When the HomeLink
2
the HomeLink
takes 20 seconds for the HomeLink
Operating HomeLink
Press the appropriate HomeLink
should turn on.
RX350_U_OM48E90U
6-5. Using the other interior features
2
®
button after programming has been completed.
®
button to operate a garage door.
®
button
®
indicator starts flashing (orange), continue to hold
®
button and perform "Programming HomeLink
®
®
®
button. The HomeLink
and within the first 10 presses of
3
®
button, after the garage door
®
button.
indicator to start flashing).
®
indicator light
539
®
,
6
®
" (it
1