130
3-2. Opening, closing and locking the doors
Power back door
The power back door can be locked/unlocked and opened/closed by the fol-
lowing procedures.
Locking and unlocking the power back door from the outside
◆
Smart access system with push-button start
Carry the electronic key to enable
this function.
Locks all the doors
1
Check that the door is securely
locked.
Unlocks all the doors
2
The doors cannot be unlocked for 3
seconds after the doors are locked.
◆
Wireless remote control
P. 124
Locking and unlocking the power back door from the inside
◆
Door lock switch
P. 126
Opening/closing the power back door using the wireless remote con-
trol
Press and hold the switch for approxi-
mately 1 second.
The power back door can be operated
whether it is locked
Pressing the switch while the power
back door is opening/closing will stop
the operation.
Pressing and holding the switch again
for approximately 1 second will operate
the power back door in the opposite
direction.
*
: Opening of the power back door when it is locked can be disabled by a customized
setting. (P. 704)
RX350_U_OM48E90U
*
or unlocked.