Install a new light bulb and then
4 7
install the bulb base to the light
unit by inserting it and turning it
clockwise.
After installing the bulb base, wiggle
it lightly to make sure it is securely
installed and turn on the rear turn sig-
nal lights to visually check that there
is no light leaking from between the
bulb base and light unit.
Install the light unit.
8
Align the tabs and push the light unit
toward the front of the vehicle to
install it.
Install the 2 screws.
9
Install the cover.
10
Remove the protective tape.
11
RX350_U_OM48E90U
7-3. Do-it-yourself maintenance
619
7