254
4-3. Operating the lights and wipers
Changing the windshield wiper rest position/Lifting the windshield wip-
ers
When the windshield wipers are not being used, they retract to below the hood.
To enable the windshield wipers to be lifted when parking in cold conditions or
when replacing a windshield wiper insert, change the rest position of the wind-
shield wipers to the service position using the wiper lever.
Raising the wipers to the service position
■
Within approximately 40 seconds of
turning the engine switch off, move
the wiper lever to the
(U.S.A.) or
tion and hold it for approximately 2
seconds or more.
The wipers will move to the service
position.
Lifting the windshield wipers
■
While holding the hook portion of
the wiper arm, lift the windshield
wiper from the windshield.
RX350_U_OM48E90U
(Canada) posi-
Hook portion