132
3-2. Opening, closing and locking the doors
Touchless sensor (vehicles with a touchless power back door)
■
The touchless power back door enables automatic opening of the power back
door by holding a hand over the upper part of the rear emblem or touching
the upper part of the rear emblem. When operating the touchless power back
door, make sure that the touchless sensor operation is enabled (P. 100) and
that you are carrying an electronic key.
While carrying an electronic key, move your hand over the upper part of
1
the rear emblem slowly and hold it there until a buzzer sounds. (The upper
part of the rear emblem can also be touched.)
When all of the doors are locked: When your hand is detected, all of the doors will
be unlocked.
Immediately after the buzzer sounds, move your hand away.
2
If you do not move your hand away, a buzzer will sound twice and the power back
door will not operate.
Check that the power back door begins to open.
3
To stop the power back door partway, touch the rear emblem.
To operate the power back door again, use a power back door switch. (P. 131,
133) (Holding your hand over the upper part of the rear emblem will not operate
the touchless sensor again.)
RX350_U_OM48E90U