Cable Adapter Module - Symbol MC909X Integrator Manual

9 - 12 MC909X Integrator Guide

Cable Adapter Module

Troubleshooting The Cable Adapter Module
Table 9-7
Symptom
Mobile computer
battery is not
charging.
During data
communications,
no data was
transmitted, or
transmitted data
was incomplete.
Possible Cause
Mobile computer was
removed from CAM or
CAM was unplugged
from AC power too soon.
Battery is faulty.
The mobile computer is
not fully attached to the
CAM.
Mobile computer
detached from CAM
during communications.
Incorrect cable
configuration.
Communications
software is not installed
or configured properly.
Ensure CAM is receiving power. Ensure mobile computer is
attached correctly. Confirm main battery is charging. If a mobile
computer battery is fully depleted, it can take up to four hours to
fully recharge a battery (if the mobile computer is off and longer
if the mobile computer is operating).
For Windows Mobile 5.0 devices, view battery status by tapping
> > tab >
Start Settings System
For WinCE 5.0 devices, view battery status by tapping
> >
Settings Control Panel
Verify that other batteries charge properly. If so, replace the
faulty battery.
Detach and re-attach the CAM to the mobile computer, ensuring
it is firmly connected.
Re-attach mobile computer to CAM and retransmit.
See the System Administrator.
Perform setup as described in
Action
icon.
Power
icon.
Power
Chapter 2, Accessories.
>
Start