Battery Charging Indicators
The mobile computer's amber charge LED, located in the Indicator LED Bar, shows the status of the battery
charging in the mobile computer. See
charges in less than four hours.
Ethernet Communication Setup
To establish a connection between the mobile computer and the host computer to communicate over an
Ethernet network, perform the following:
Install MobileDox Cradle Manager
•
Install iDockIt
•
Configure the mobile computer
•
Configure the host computer
•
Configure the DHCP server
•
Configure the cradle.
•
Installing MobileDox Cradle Manager
NOTE MobileDox Cradle Manager is used only when establishing a connection using the Four Slot Ethernet
cradle.
The Cradle Management software features:
View cradles that are attached to the network via MobileDox Net
•
View cradle status
•
Modify cradle settings including:
•
-
IP address settings
-
DNS and WINS settings
-
Identification settings
-
USB port specific settings
Restart cradles connected to the network via MobileDox Net
•
Update the firmware of MobileDox Net.
To install the Cradle Management Software on the host computer, download the latest version of the software
from http://devzone.symbol.com. Refer to the instructions included with the software.
Installing iDockIt
iDockIt is a connection utility which manages activities between the mobile computer and a connected Ethernet
cradle. For more information on the utility, see the documentation provided with iDockIt.
iDockIt features:
The ability to manage multiple cradle profiles. iDockIt auto-detects the cradle communication type and
•
behaves accordingly.
Table 1-2 on page 1-8
for charging status indications. The battery usually
Accessories 2 - 11