Scanning Rd Bar Codes - Symbol MC909X Integrator Manual

Rapid Deployment Window (Continued)
Table 7-6
Text Box/Button
About
Reset
Exit

Scanning RD Bar Codes

When the mobile computer scans and successfully decodes a single or multiple RD bar codes, the data
encoded in the bar code can:
Reset the mobile computer's connection profile. A connection profile is a set of Wireless Application
•
parameters that the mobile computer uses to access the wireless network.
Initiate downloads of one or more software packages from an FTP server to the mobile computer.
•
NOTE Currently, RD only recognizes AirBEAM software packages. See
information.
To scan an RD bar code:
Obtain the appropriate RD bar code(s) from the MSP Administrator.
1.
Launch the RD application on the mobile computer. The
2.
Ready to Scan
No Bar Codes Left to Scan
Rapid Deployment Window
Figure 7-18
Scan the appropriate bar code(s) to complete the configuration and/or download.
3.
A PDF417 bar code (2-D bar code) can contain all download data in a single bar code. In this case,
a.
only one bar code may be required to scan.
Multi-part linear bar codes (1-D bar codes) can require scanning several bar codes. Bar codes can be
b.
scanned in any order. The text box under
scan (see Figure
Displays the
Rapid Deployment Client Info
Removes any previously scanned data.
Closes the application. A confirmation window displays. Tap
return to the
Rapid Deployment
Note: If the application is exited prior to scanning all required bar codes, any
scanned data collected up to that point is lost.
Ready to Scan
Bar Codes Left to Scan are
Bar codes left to scan...
7-18).
Application Deployment for WinCE 5.0 7 - 25
Description
window.
window.
Chapter , Introduction
window displays.
Rapid Deployment
shows the remaining bar codes to
to exit or to
Yes No
for more