Changing Profiles; Editing A Profile; Creating A New Profile - Symbol MC909X Integrator Manual

4 - 24 MC909X Integrator Guide
Manage Profiles Context Menu
Figure 4-31

Changing Profiles

A completed profile is a set of configuration settings that can be used in different locations to connect to a
wireless network. Create different profiles to have pre-defined operating parameters available for use in
various network environments. When the
Manage Profiles
Figure 4-32
Tap and hold a profile and select
the mobile computer uses the authentication, encryption, ESSID, IP Config, and power consumption settings
configured for that profile.

Editing a Profile

Tap and hold a profile and select
ESSID and operating mode for the profile. Use the
security parameters. See

Creating a New Profile

To create new profiles from the
WLAN Profiles
from the pop-up menu to set this as the active profile. Once selected,
Connect
from the pop-up menu to display the
Edit
Profile Wizard
Profile Editor Wizard on page
window, tap-and-hold anywhere in this window.
Manage Profiles
window displays, existing profiles appear in the list.
Profile Wizard
to edit the profile power consumption and
4-6.
where you can set the