Four Slot Cradle; Installing The Cradle/Charger On The Bracket - Symbol MC909X Integrator Manual

2 - 54 MC909X Integrator Guide
Secure the slide to the bracket by inserting the two pan-head screws provided from below the bracket, up
2.
through the bracket's screw holes and then through the slide's pan-head screw holes.
Secure a second slide to the remaining two screw holes on the bracket in the same manner.
3.
Pan-head
screw holes
Insert screws from below
Attaching Two Shelf Slides
Figure 2-64

Four Slot Cradle

To attach the shelf slide to the wall mount bracket for use with a four slot cradle:
Place a slide on the left-hand bracket, aligning the larger pan-head screw holes in the slide with the left two
1.
screw holes on the bracket.
Secure the slide to the bracket by inserting the two pan-head screws provided from below the bracket, up
2.
through the bracket's screw holes and then through the slide's pan-head screw holes.
Place a slide on the right-hand bracket, aligning the larger pan-head screw holes in the slide with the right
3.
two screw holes on the bracket.
Secure the second slide to the bracket as described in Step 2.
4.

Installing the Cradle/Charger on the Bracket

Install the cradle or charger onto the bracket, inserting the bracket's slide into the grooves on the bottom of the
cradle/charger and sliding the cradle/charger into the desired position.
For one single slot cradle/four slot charger, center it on the bracket.
Slide grooves on bottom of
cradle/charger over bracket slide
Attaching Two Shelf Slides
Figure 2-65