Connecting The Rs-485 Device - Samsung SHR-5040 User Manual

ConneCting the rs-485 deviCe

 Please check that the RS-485 device is supported by the SHR-5040/5042 product. And, a caution shall be
made when connecting to the RS-485 jack since it has the polarity (+ and –).
Caution
ConneCting the usB
1. It has a total of 2 USB connection ports on the front and rear sides of SHR-5040/5042.
2. Connect the USB HDD, USB memory through the front/rear ports of SHR-5040/5042.
3. Only one USB device can be connected to each USB port.
4. It provides the hot-plugging function that allows connecting/disconnecting a USB device while operating the system.
SHR-5042_Eng_02.indd 15
Port for connecting the RS-485 signal wire
(connect to the RX-Receiver)
connecting with other devices _15
2008-01-25 오전 9:31:12