Samsung SHR-5040 User Manual page 59

recording schedule
This function allows you to setup a recording schedule
for the DVR by each camera per hour.
1. schedule timeline:
You can set a variety of recording mode on time of
each cameras. After you select recording mode,
designate scope by dragging mouse.
2. recording Mode:
It shows a variety of recording type. Select recording
type and drag it to schedule line.
continuous: Records continuously.
Motion: Recording only when motion is detected on
screen.
Alarm in: Recording only when Alarm In is activated.
SHR-5042_Eng_02.indd 55
event
Motion detection
This Motion Detection uses connected with recording,
alarm, emergency when motion is detected.
1. camera:
Select channel to setup camera.
2. Motion detection Area:
Designate scope of motion detection area to see
movement of picture in camera. It will be marked green
color.
Motion detection scope designation: Click mouse
left button to designate the area of motion detection
Motion detection scope cancellation: Click mouse
right button to cancel the area of motion detection .
3. sensitivity:
it can set up detection level about motion detection
area.
4. Use Beep:
It makes beef when movement is found in motion
detection area .
5. Linked camera:
Select camera which will connect with motion detection
type camera. If motion detection type camera detect
any movement, it will record with selected camera.
6. Linked Alarm out:
Select alarm out to connect with camera which is set
up motion detection.
appendix _55
2008-01-25 오전 9:31:40