Samsung SHR-5040 User Manual page 21

: record Lock Icon
It indicates that the record lock is activated.
This icon appears when you are recording video images
while the record lock is set. To cancel the recording,
enter
the preset password.
: PtZ Icon
The channel that the PTZ function has been set shows
the PTZ icon. It is changed to yellow when the PTZ
function is now active.
: Audio Icon
This icon indicates the Audio On/Off state and if it is
turned on, the icon is changed to yellow.
This icon does not appear when the Video or Audio is
disabled.
: Alarm in Icon
It appears when an event from the Alarm In is detected.
: Motion Icon
It appears when a motion event occurs.
: Zoom Icon
It appears when the zooming function is active and
disappears when it is cancelled.
: Freeze Icon
It appears when the Freeze function is active and
disappears when it is cancelled.
: insufficient hdd space Icon
It appears when the HDD writing space is not enough.
: screen switching Icon
It appears when it is in the screen switching mode.
v.Loss / v.off : video input status
If no video inputs are detected even when the Video
Setup is set to On, the [V.Loss] icon appears on the
corresponding channel; and the channel that the Video
Setup is set to Off shows the [V.Off] icon.
osd Position control Function
 It is possible to control OSD position of
Caution
CH1, CH3 and CH4 on live screen by
Up/ Down/Left/Right buttons when in
quad division mode.
SHR-5042_Eng_02.indd 17
Live screen modes
After taking 4 live video inputs, images are displayed in
the following 3 modes.
CAM_01 CAM_02
CAM_01
CAM_03 CAM_04
< 4 Split >
< Auto Sequence >
 4 split Mode:
It shows 4 video channels on the respective split
screens. Any channel that is shown on the split screen
can be arbitrarily selected.
 PiP (Picture in Picture):
The 1/4-sized small screen appears on the full screen.
The channels for both full and small screens can be
arbitrarily selected.
The location of PIP screen can be set to any of 5
locations within the full screen by using the  or 
button.
 Auto sequence Mode:
Multiple channels are sequentially displayed on the full
screen at the preset interval.
CAM_02
< PIP >
live _17
2008-01-25 오전 9:31:14